Xiaomi Mijia Vertical Garment Steamer
Xiaomi Mijia Vertical Garment Steamer
Regular price
EGP 9,999
Sale price
EGP 9,999
Regular price
-
Estimated delivery: Feb 16 - Feb 20
🔒 Secure Payment
Couldn't load pickup availability
Utilize the Garment Steamer When Needed, Functions as a Clothes Rack in Idle Time
- 130°C High-Temperature Delicate Steam Smoothens Wrinkles, Eliminates Bacteria and Mites
- 300kPa Pump Pressure Easily Penetrates Thick Clothing
- Continuous 36g Steam Output Ensures Effortless and Efficient Ironing
- Large 2.3L Water Tank, Handles the Whole Family’s Clothing in One Go
- 30s Rapid Preheating, Iron Immediately Without Waiting Long
- 2 Steam Settings, Adjust for Thin or Thick Clothing as Desired
- Handle Control, Ironing Without Bending Over
Specifications
| Material | ABS (Acrylonitrile Butadiene Styrene) |
| Colour Name | White |
| Product Height | 158 cm |
| Capacity | 2.3 L |
| Appliance Capacity | 2 - 2.9 L |
| What's In The Box | Main Unit x1 Anti-Scalding Glove x1 Head Bracket x1 Clothes Hanger Rod x1 Ironing Board x1 Upper Pole x1 Middle Pole x1 Lower Pole x1 Instruction Manual x1 |
| Model Number | ZQGTJ02KL |
| Installation | Freestanding |
| Product Length | 43 cm |
| Product Width | 31 cm |
| Wattage | 2000 W |
| Appliance Wattage | Above 1800 Watt |
| Features | Portable, Auto Shut Off |
*30s fast preheating: Boiler preheats in 30s, after which steam starts being generated. Tested by the Koala Mama Lab. Actual performance may vary during use due to environmental changes. These results are for reference only.
*300kPa pump pressure: 300kPa=3 bar. In a test environment with a temperature of 25°C±2°C and at rated voltage, the maximum steam pressure from the middle hole of the garment steamer was tested to be at >3 bar. Tested by the Koala Mama Lab. Actual performance may vary during use due to environmental changes. These results are for reference only.
*130°C high-temperature fine steam: In a test environment with a temperature of 25°C±2°C, with the product at rated voltage under experimental conditions, set to level 2, and with the steam pipe placed upright, two minutes after the garment steamer emitted steam, the steam temperature was measured with a thermocouple 2mm away from the steam outlet. Five sets of data were tested, and the mean was taken as the test result. Tested by the Koala Mama Lab. Actual performance may vary during use due to environmental changes. These results are for reference only.
*99.99% bacteria removal: In a laboratory environment, the garment steamer was set to level 2. The test sample was fixed on the test load cloth. Once the ironing head of the garment steamer emitted steam, it was ironed vertically at a speed of 3cm/s to 5cm/s for 3 minutes, completely covering the entire load cloth area. The test was repeated 3 times, and the average sterilisation rate was calculated. Tested by Guangzhou Microbiology Research Institute Group Co., Ltd., with test report No.: XJ20233480.
*99.99% mite removal: In a laboratory environment, the garment steamer was set to level 2. The ironing head cleaned the entire test cloth area at a speed of (0.2±0.02)m/s. Each push-pull motion was considered one cycle, and a total of 10 cycles were run. After the garment steamer was used, the number of live and dead mites on the test sample was counted under a stereomicroscope. The test was repeated 3 times, and the mean was taken as the final result. Tested by Guangzhou Microbiology Research Institute Group Co., Ltd., with test report No.: JD202400026.
*22g/min: In a test environment with a temperature of 25°C±2°C, at rated voltage, set to level 1, with the steam pipe placed upright, the average steam volume was tested for five minutes after the steam stabilised, showing a control deviation of 22g/min±10%. Tested by the Koala Mama Lab. Actual performance may vary during use due to environmental changes. These results are for reference only. Report No.: HY20240228.
*36g/min: In a test environment with a temperature of 25°C±2°C, at rated voltage, set to level 2, with the steam pipe placed upright, the average steam volume was tested for five minutes after the steam stabilised, with a control deviation of 36g/min±10%. Tested by the Koala Mama Lab. Actual performance may vary during use due to environmental changes. These results are for reference only. Report No.: HY20240228.
*The whole family's clothing: Calculated based on a family of three, with 3 garments per person, coming to a total of 9 pieces. Assuming 1 piece takes 5 minutes to iron, total ironing time is 45 minutes.
*Five safety protections: thermal fuse protection, NTC temperature control protection, power-off protection when no water is detected for 2 minutes, boil-dry protection, and water-electricity isolation.
*Continuous ironing for up to 60 minutes: In a test environment with a temperature of 25°C±2°C when the water tank is full, the steamer can run for approximately 60 minutes at level 2. Tested on garments after washing and air-drying. Depending on the thickness, each item of clothing requires 3 to 8 minutes. On level 2, ironing a shirt takes approximately 3 minutes, ironing a pair of long trousers takes around 4 minutes, and ironing a coat takes about 8 minutes. Tested by the Koala Mama Lab. Actual performance may vary during use due to environmental changes. These results are for reference only. Report No.: HY20240301.
*Unless otherwise specified, all the above data was provided by the Koala Mama Lab. Due to differing environments, there may be slight variations during actual use.
